If your device has this switch, move it to the "Lock" position. Close Regedit and restart your computer. Find the USB flash drive in the list of drives connected to the computer.
Screenshot courtesy of Microsoft. Type diskpart and press Enter. Click OK, exit Regedit and reboot your computer.
This command creates a new partition so you can format the disk. In this example, we want to work with disk 1, so the command is select disk 1. If you want to set the flash drive to read-only for all users, in step 6, uncheck all boxes in the Allow column, except for the Read entry.
Type create partition primary and press Enter. Change the Value data from 1 to 0 and click OK to save the change. If you have Windows 10, simply right-click on the Start button bottom left of the screen and choose Command Prompt admin.
This command deletes all volumes and partitions from the disk, which deletes all folders and files as well. Click "Apply" to confirm to format the write-protected USB flash drive or pen drive. The smaller cluster size is, the bigger file allocation table FAT will be. In these cases, you may not be able to make the flash drive writable.
Here is a simple way you can try to remove the write protection and format the USB flash drive and pen drive with no hassle. Type exit when the volume is formatted to close the DiskPart window.
Right-click on the flash drive icon and select Write protected flash drive in the pop-up menu. Now, at the prompt, type the following and press Enter after each command: Connect your USB flash drive or pen drive again, and you should find the write protection is removed and the device is no longer write protected.
When you are finished, type exit to quit the program. Formatting the Drive credit: Name this WriteProtect and set its value to 0. All of your connected drives are displayed. Diskpart With your USB drive or memory card attached to your computer, launch a command prompt.
This action effectively sets all files, and the device itself, to read-only mode. From the size of the disk, you should be able to figure out which one is your USB flash drive. Select the file system type to be created from the "File System" drop-down list.
Select your USB flash drive with the select disk command. Write-protection switch Some USB flash drives have a write-protection switch on the side or bottom.Sep 16, · Restart your computer and try copying files into your USB drives.
Important Note: Sometimes this problem is caused by two Windows registry entries that have become corrupted.
Occasionally, USB drives can become write-protected due to a manufacturer setting or because of a fault in the disk. If you aren't prompted to enter a password to make changes to the files on the disk, you need to clear the write.
In these cases, you may not be able to make the flash drive writable. Open My Computer or File Explorer. Find the USB flash drive in the list of drives connected to the computer. Right-click on the flash drive icon and select Properties in the pop-up menu.
On the Properties window, click the Security tab. Sep 18, · There is 8 ways to remove write protection on USB flash drive 1- Scan your flash drive with updated antivirus 2- Unlock your memory card or flash drive "some flash drive have lock/unlock button.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Write protection being difficult is one of the more frustraiting issues to deal with when you're trying to leave the office for the day.
Not being able to move your files over onto a USB stick or drive is the last thing you want to deal with.Download